
Add to Cart
Compatibility brand |
Cisco,HP,Juniper,Finisar,D-Link,Alcatel,etc |
Application
|
Telecommunication |
Power Supply
|
+3.3V |
Operating Temperature
|
0 ℃ to 70 ℃ |
Wire Gauge
|
30AWG |
Protocols Supported |
InfiniBand, Ethernet, Fiber Channel |
Data Rate |
10G |
The SFP+ Active Optical Cable (AOC) is a 10Gbps solution to10G Ethernet, and datacenter. The integrated cable transmits 10Gbps
data in each direction over MMF with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight.
10Gb/s active optical cable up to 100m OM2 MMF850nm VCSEL and PIN receiver Single 3.3V power supplyOperating Case Temperature: 0~70°C
Support 10GBASE-SR/10G Fiber Channel application
Compliant to SFP+ Electrical MSA SFF-8431
Compliant to SFP+ Mechanical MSA SFF-8432
Multi rate of up to 11.3Gbps
Transmission distance up to 300m
+3.3V single power supply
Low power consumption
Operating case temp
Commercial: 0°C to +70 °C
RoHS compliant
Password protection for A0h and A2h
Applications
10GBASE-SR at 10.31Gbps
InfiniBand QDR, SDR, DDR
Other optical links
Table1- Absolute Maximum Ratings
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
Supply Voltage | Vcc3 | -0.5 | - | +3.6 | V | |
Storage Temperature | Ts | -10 | - | +70 | °C | |
Operating Humidity | RH | +5 | - | +85 | % | 1 |
Receiver Damage Threshold | P Rdmg | +3.4 | - | - | dBm |
Note1: No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
Parameter | Symbol | Min. | Typical | Max. | Unit |
Operating Case Temperature | TC | 0 | - | +70 | °C |
Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.47 | V |
Power Supply Current | Icc | - | - | 150 | mA |
Power Dissipation | Pd | - | - | 0.6 | W |
Bit Rate | BR | - | 10.3125 | - | Gbps |
Fiber Bend Radius | Rb | 3 | - | - | cm |
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes | |
Transmitter | |||||||
Differential Data Input Swing | Vin,P-P | 200 | - | 1600 | mVPP | ||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | |
Transmitter Fault | VOH | 2.0 | - | VCC | V | ||
Normal Operation | VIL | 0 | - | 0.8 | V | ||
Tx_Disable | Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | |
Receiver | |||||||
Differential Date Output | Vout | 370 | - | 1600 | mV | ||
Output Differential Impedance | ZD | 90 | 100 | 110 | Ω | ||
Normal Operation | VOL | 0 | - | 0.8 | V | ||
Rx_LOS | Lose Signal | VoH | 2.0 | - | VCC | V |