40G DSFP+ Active optical cable
Features
Support 40GBASE-SR4/QDR application
Compliant to QSFP+ Electrical MSA SFF-8436
Multi rate of up to 10.3125Gbps
+3.3V single power supply
Transmission distance up to 300m
Low power consumption
Operating case temp
Commercial: 0°C to +70 °C
UL certification cables (optional)
RoHS compliant
Applications
40GBASE-SR4 at 10.3125Gbps per lane
InfiniBand QDR
Other optical links
| Compatibility brand
| Cisco,HP,Juniper,Finisar,D-Link,Alcatel,etc |
| Application
| Telecommunication |
| Power Supply | +3.3V |
| Operating Temperature | 0 ℃ to 70 ℃ |
| Cable Type | OM2/OM3/OM4 Fiber Cable |
| Conductor Material | optical Fiber |
General Description
Hilinktech QSFP to QSFP Active Optical Cables are a high performance, low power consumption, long reach interconnect solution supporting InfiniBand QDR/DDR/SDR,1.25G/10G/8G/4G/2G fiber channel ,PCIe and SAS. It is compliant with the QSFP MSA and IEEE P802.3ba.This QSFP AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 11.3Gb/s, providing an aggregated rate of 45.2Gb/s. And it is one kind of parallel transceiver which provides increased port density and total system cost savings.
Features
Four-channel full-duplex active optical cable
Transmission data rate up to 11.3Gbit/s per channe
Reliable VCSEL array technology using multi-mode fibe
Available in standard lengths of 3, 5, 10, 15, 20, 30, 50,100
Low power consumption <1.5
Operating case temperature 0°C to +70°
3.3V power supply voltag
RoHS 6 complian
Hot Pluggable QSFP form factor
Applications:
40 Gigabit Ethernet
Fibre Channel Application
InfiniBand QDR, SDR, DD
High-performance computing cluster
Servers, switches, storage and host card adapte
Table1- Absolute Maximum Ratings
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Supply Voltage | Vcc3 | -0.5 | - | +3.6 | V | |
| Storage Temperature | Ts | -10 | - | +70 | °C | |
| Operating Humidity | RH | +5 | - | +85 | % | 1 |
| Receiver Damage Threshold | P Rdmg | +3.4 | - | - | dBm | |
Note1: No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Operating Case Temperature | TC | 0 | - | +70 | °C |
| Power Supply Voltage | Vcc | 3.14 | 3.3 | 3.47 | V |
| Power Supply Current | Icc | - | - | 150 | mA |
| Power Dissipation | Pd | - | - | 0.6 | W |
| Bit Rate | BR | - | 10.3125 | - | Gbps |
| Fiber Bend Radius | Rb | 3 | - | - | cm |
Electrical Characteristics
Table 3- Electrical Characteristics
| Parameter | | Symbol | Min. | Typ. | Max. | Units | Notes |
| | | | Transmitter | | | | |
| Differential Data Input Swing | Vin,P-P | 200 | - | 1600 | mVPP | |
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |
| Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | |
| | Transmitter Fault | VOH | 2.0 | - | VCC | V | |
| | Normal Operation | VIL | 0 | - | 0.8 | V | |
| Tx_Disable | Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | |
| | | | Receiver | | | | |
| Differential Date Output | Vout | 370 | - | 1600 | mV | |
| Output Differential Impedance | ZD | 90 | 100 | 110 | Ω | |
| | Normal Operation | VOL | 0 | - | 0.8 | V | |
| Rx_LOS | Lose Signal | VoH | 2.0 | - | VCC | V | |
