1M OM3 Fiber 10G SFP + AOC Active Optical Cable
SFP+ Active Optical Cable (AOC) is a 10Gbps solution to 10G Ethernet, and high-performance computing applications. The integrated cable transmits 10Gbps data in each direction over a loose tube fiber with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight.
| Compatibility brand | Cisco,HP,Juniper,Finisar,D-Link,Alcatel,etc |
| Application | Telecommunication |
| Power Supply | +3.3V |
| Operating Temperature | 0 ℃ to 70 ℃ |
| Wire Gauge | 30AWG |
| Protocols Supported
| InfiniBand, Ethernet, Fiber Channel |
| Data Rate
| 10G |
Product Feature:
Support for multi-gigabit data rates up to 10.5Gbps
Data rates backward compatible to 1Gbps
Hot-pluggable SFP 20PIN footprint
I/O Connector designed for high speed differential signal applications
Improved Pluggable FormFactor(IPF) compliant for enhanced EMI/EMC performance
Compatible to SFP+ MSA
Temperature Range: 0~ 70 °C
RoHS Compatible
Product Applications:
High capacity I/O Storage Area Networks
Network Attached Storage
Storage Servers
Switched fabric I/O
Data center cabling infrastructure
High density connections between networking equipment
Optical Characteristics
Table 4-Optical Characteristics
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| | Optical transmitter Characteristics | | | |
| Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 | | |
| Center Wavelength Range | λc | nm | 820 | 850 | 880 | | |
| Laser Off Power | Poff | dBm | - | - | -45 | | |
| Launch Optical Power | P0 | dBm | -6.0 | - | - | 1 |
| Extinction Ratio | ER | dB | 3 | - | - | | |
| Spectral Width(RMS) | RMS | nm | - | - | 0.45 | | |
| | Optical Receiver Characteristics | | | |
| Data Rate | DR | Gbps | 9.953 | 10.3125 | 11.3 | | |
| Bit Error Rate | BER | dBm | - | - | E-12 | 2 |
| Overload Input Optical | PIN | dBm | 2.4 | - | - | 2 |
Note
| 1. | Coupled into 50/125 MMF. |
| 2. | Measured with PRBS 231-1 test pattern @10.3125Gbps.BER=10E-12 |
Support 10GBASE-SR/10G Fiber Channel application
Compliant to SFP+ Electrical MSA SFF-8431
Compliant to SFP+ Mechanical MSA SFF-8432
Multi rate of up to 11.3Gbps
Transmission distance up to 300m
+3.3V single power supply
Low power consumption
Operating case temp
Commercial: 0°C to +70 °C
RoHS compliant
Password protection for A0h and A2h
Applications
10GBASE-SR at 10.31Gbps
InfiniBand QDR, SDR, DDR
Other optical links
