Duplex OM3 Multimode Fiber Patch Cord LC ST Fiber Cable Optical Jumper
It is a device used to make removable (movable) connections between optical fibers. It is a precision buttressing of the two ends of an optical fiber so that the optical energy output from the transmitting fiber can be coupled to the receiving fiber to the maximum extent possible and the impact on the system caused by its intervention in the optical link can be minimized. Fiber optic patch cable is a passive optical device to achieve the active connection between optical fibers, it also has the function of connecting optical fibers to active devices, optical fibers to other passive devices, optical fibers to systems and instruments. It also has the function of connecting fiber to active devices, fiber to other passive devices, fiber to systems and instruments.
| Item | SM | MM |
| Polishing Type | PC | UPC | APC | PC |
| Insertion Loss | ≤0.2dB (Typical ≤0.1dB | ≤0.3dB/0.5dB(MTRJ) |
| Custom | | | | |
| Return Loss | ≤-45dB | ≤-55dB | ≤-65dB | / |
| Custom | | | | |
| Durability(500 Mating) | 0.2 dB Max. Increase |
| Operating Temperature | -20°C~+75°C |
| Storage Temperature | -40°C~+75°C |
| Remark: | Ferrule Concentricity<1μm |
| | Ferrule inner diameter tolerance+1/ 0μm |
| | Ferrule outer diameter tolerance±0.5μm |
| | Insertion loss<0.1dB random mating |
Fiber Optic Patch Cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".
Type
Performance | Singlemode APC | Multimode |
| Standard Loss | Low Loss | Standard Loss | Low Loss |
| Insertion loss | Maximum Value | ≤0.7dB | ≤0.35dB | ≤0.5dB | ≤0.35dB |
| Typical Value | 0.4dB | 0.2dB | 0.35dB | 0.2dB |
| Return Loss | ≥60 dB | ≥20dB |
| Test Wavelength | 1310nm / 1550nm | 850nm / 1300nm |
1. Using imported ceramic pins, high-quality fiber optic cable, providing better insertion loss and return loss, avoiding the degradation of transmission performance and damage to optical transceiver devices.
2. Advanced foreign grinding technology and grinding equipment, to ensure that the optical fiber circular grinding offset, fiber depression, the surface of the fiber without scratches and defects, the size of the radius of curvature of the ceramic end face and other grade parameters in line with standard regulations.
ABOUT US
ADTEK
Shenzhen ADTEK Technology Co., Ltd. was established in 2007,is a leading professional manufacturer and exporter from China,With over 12 years' experience in the export market. ADTEK has been continually growing and expanding the product lines to keep up the pace of industry trends. leading network connection products and solutions
Ultra-large bandwidth, ultra-low loss, ultra-high speed, 400G network connection for the next generation.
